Not too far though... The new shack is in progress and I have moved it upstairs into my box room.I have a lot more to do but it the shack is coming along nicely. The shack now has a 42" 4K lcd tv, ICOM IC-9100, and I now have a Audio Technica studio mic with Beringer 802 mixing deck.
Welcome To Barry G0SCI's Blog. a page to add info and find out more about the world of Barry g0sci
Sunday, 29 March 2015
Monday, 9 February 2015
ITS IAMBIC TIME
Well it was after 12 at night and i was into the small hours of the morning, I wasn't tired and i had the idea to knock up a iambic keyer for my new ebay purchase
I managed to find a arduino nano, a mini piezo speaker, some wire and a couple of 4.7K resistors
More Long distance results from WSPR
Not really much to say except the 100mW travels well
And further again!
A big thank you to Hans Summers at http://www.hanssummers.com/ and you can find his Ultimate 3 for sale at http://www.qrp-labs.com/
Tuesday, 3 February 2015
THE ULTIMATE 3 WSPR PART4 (THE RESULTS)
Here is a few WSPR map results
All in All A Surprising result with contacts from all over the globe using a trap dipole and the U3 txing 50 - 200 Mw ...Barry G0SCI
THE ULTIMATE 3 WSPR PART 3 ( THE CURVES)
Here is the results of the tests i done with the filters with my Rigol DSA815TG
160 Meters
80 Meters
40 Meters
30 Meters
20 Meters
10 Meters
How i tested the low pass filters
THE ULTIMATE 3 WSPR PART 2 (TESTING)
The completed U3 with room for more addons if needed
Another view from the rear with antenna, power (5 volts) and gps sockets
The GPS new and old (the old V,KEL in the box with 3.3v regulator board) SKM61 has just been delivered and is pictured to the right of the box
I would advise to use quick drying transformer varnish
THE ULTIMATE 3 WSPR PART1 (BUILDING)
Well the Hans Summers U3 Kit arrived and as you can see i had my work cut out....
As you can see the PCB's are really well made and a pleasure to solder

I mocked up a couple of test low pass filters to test the U3 with temp hot melt
Once the U3 was built i powered up and it worked first time
Filters in order from left to right 160, 80,40,30,20 and 10 meters with a fresh coat of transformer varnish which seals them from the elements and holds them in place... no nasty hotglue
The GPS i purchased from ebay and the lovely new case came so we are on the home straight !
Subscribe to:
Posts (Atom)